Make: Unknown | Stock number: 1119A | Updated at: 2024-04-20 13:21:23 UTC
Morbark chip blower, approx 36" dia, electric drive, comes with single loading pipe, excellent co...
Model #F42ML, 12" in - 12" out, 6.5"- 5 groove pulley, ( no power ) there is extra pipe included....
30 in. dia. 15 HP. electric motor, includes mounting plate and pipe, VERY GOOD CONDITION Make: Morbark
Tiptan Iron Works Swing Arm Cut off Saw, 20" blades, 10 hp electric motor, Hyd. feed cylinder, 18...
3 head block, 36" carriage, top saw, 60' long track, frame, husk, 60 hp carriage drive, cab and a...
LH handset mill from the 1950s 4 head block, it is still operable, there is one extra blade and t...
LH, 4 HB, opens to 36 in, carriage is 20 ft. in length, electric setworks, includes track/frame, ...
drop belt, approx 20" wide x 12' long, hyd drive, good working condition Make: Unknown | Stock number: 9171
Mellott style log deck, 4 strands, 12' wide x 40' long, Tulsa Winch hyd drive, includes stop-load...
3 Strand log deck, 8' 6" wide x 18' long, electric drive, H-78 chain, good working condition Make: Unknown
3 strand, 84" w 38'2" long, #80 rooftop chain, ( no gear no power) LIKE NEW. Call 920-348-5767 fo...
pan is 18" wide x 9" tall sides, 65' long, includes sawdust section, electric drive, good working...
20' long section, Jeffery vibrating conveyor, drive section included, working condition Make: Unknown | Stoc...
Carrier vibrating conveyor, 24" wide pan x 50' long, 12" tall sides, electric drive, very good co...
belt conveyor 24" wide x 8' long, was used as an off-bearer belt, good condition Make: Unknown | Stock numbe...
belt conveyor 24" wide x 40' long, no sides, good working condition Make: Unknown | Stock number: 9175
Slab drop belt, 24" wide x 12' long, electric drive, hyd cylinder for drop belt, very good condition Make: U...
roll case approx 24" wide x 30' long, end section has spirals, good working condition Make: Unknown | Stock ...
Roll case, 30" wide x 41' long, has several sections of spirals and several stops, very good cond...
Mellott Mfg. conveyor system consisting of; One (1) 8” x 30” x 14’ long – 6 roller with hold One ...
27" 6 arm, includes lots of new parts, Good Working Condition, price includes some installation c...
rosserhead style, in working condition Make: HMC | Stock number: 6036 | Updated at: 2024-05-01 18:20:07 UTC
Dust cyclone, approx 36" dia x 6' tall, 8" inlet-10" outlet, includes stand and a few pipe adapte...
Meadows, 4" thick x 36" wide capacity edger, 1 stationary, 1 moveable blade, moveable fence, line...
2019 Accu-Cut edger, 6" x 40" capacity, includes new feed belts and is ready for production Make: AccuCut
3 Blade edger, 4"x 30", 1 movable & 2 stationary blades, hyd infeed & outfeed & press down roller...
Remodeled Frick Edger, 4"x 27", 2 blade 1 movable, 10' infeed & 10' outfeed & blade adjustment is...
vertical edger, 2 split blades, 40 hp electric powered, good working condition Make: Helle | Stock number: 5124
Paxter Weld & Machine gang rip, 2 9/16" arbor, spacers & some blades, spring loaded powered press...
Shop built gang saw, 6" thick capacity, line-shaft ready, includes extra blades and spacers, rece...
Cornell double arbor gang saw, 6" thick x 24" wide capacity, 2- 100 hp electric motors for arbors...
with a 15 HP electric drive, VERY good condition Make: Mellott | Stock number: 18080 | Updated at: 2024-05-0...
36" chain type log turner, hyd drive, good working condition Make: Mellott | Stock number: 8057 | Updated at...
Model #7, 48 in. Hyd. drive, GOOD CONDITION Make: Mellott | Stock number: 8026 | Updated at: 2024-05-01 18:5...
"Hochstetler" band resaw, 12" x12" x 12' long capacity, line-shaft ready, complete run-around sys...
227 cutting hr. fully hyd. log lift, rest, front & back toe lifts, turner, & log clamp, power saw...
A Super Hyd. mill, 65 hp Yanmar 1047 hr. electronic setworks, in excellent condition. Call 937-46...
2022 Wood-Mizer LT40HD Super. 40 total hours, 38 HP gas engine, debarker, Lube-Mizer, Laser kit, ...
With a 4045 John Deere, 1350 hr. on the mill, E type controls, hyd. setworks, debarker mudsaw, (n...
3000-4000 hr. mud saw, axle included (to make it portable) MOTIVATED SELLER. Call 276-472-2199 fo...
Fully hyd. with a 35 hp. Deutz diesel with 1661 hr. log turner & log loader, + 20 bands, Cct Cla...
55hp diesel engine w/60hr. This always under cover very well maintained, includes a pedestal cont...
250 hp. WPT clutch with a 14" 10 groove C pulley, this engine needs to be rebuilt or take it for ...
200 Hp , -3000 hr. WPT clutch with a 8'' 8 groove C pulley, turbo, a good running engine. Call 93...
Brewco 2 head resaw with complete run-around system, electric/ hyd powered, good working condition Make: Brewco
2022 Wood-Mizer LX25 Manual push mill. No power feed. This mill can be converted into a resaw wit...
With a 24 HP Honda engine, a new idle shaft was replaced, it is an older machine but is still in ...
Morgan double end trim saw, 6" thick x 68" long capacity, line-shaft ready, feed is hyd driven, g...
48" 6 knife chip-pac, includes 5' x5' shaker screen, electric drive, includes soft start, numerou...